Controval
NewMetering and transfer

Well test skids

A compact test separator, Coriolis measurement and data logging on one portable skid, to measure what each well produces.

Well test skid, 3D design
Well test skid, 3D designDesign model of a portable well test skid: separator, Coriolis meters, water-cut analyzer and control cabinet on one frame.
At a glance

Know what each well produces, without building a test station.

  • Compact test separator, 2- or 3-phase
  • Coriolis metering of the liquid and gas outlets
  • Water-cut analysis for oil and water
  • Control cabinet with data logging and remote communication
New concept

Engineered with your operation, tested before it ships.

This is a new addition to our range. We develop it with you around your wells, fluids and site, and test the complete skid in our workshops before it ships.

  • Engineered to order: separator, metering and data defined by your wells
  • Documentation package: P&ID, general arrangement, datasheets and FAT procedure
  • Factory acceptance test (FAT) in our workshops, site acceptance test (SAT) at your site
Learn more

How it works, configurations and standards

Open the sections you need. Everything stays on the page for reference and print.

01

How it works

Process diagram and step-by-step timeline

A well test skid separates the well stream and measures the oil, water and gas that come out, so you can test wells one at a time and allocate production. Separator, metering, water-cut analysis and controls come together on one portable skid.

We design the skid around your wells: separator size and phases, metering technology, instrument signals and data logging. Skid or trailer mounting lets you move it from well to well.

In the order the fluid passes through it. Select a step, use the arrows, or let it play.

GASOILWATERfrom the well /choke manifoldPSVPTLTPCCORIOLISLCCORIOLISWATER CUTsignalsDATA LOGGINGCONTROL CABINETRemote communication1Well stream2Compact test separator3Gas: pressure control, Coriolis4Liquid: level control, Coriolis5Water-cut analyzer6Outlets

Typical schematic configuration, shown for reference only. The final design, equipment, instrumentation and applicable codes depend on the client's process conditions, specification and project requirements, and are defined during engineering.

Swipe sideways to see the whole diagram.

1 / 7
Step 1 of 7

Well stream in

The well stream arrives from the wellhead or choke manifold through an isolation valve. It is a mix of gas, oil and water.

Step 2 of 7

Compact test separator

An inlet diverter slows the stream and the gas separates from the liquid. In a 3-phase version, the liquids rest so oil and water also separate by density. A relief valve and pressure and level transmitters protect and monitor the vessel.

Step 3 of 7

Gas outlet and metering

A pressure control valve holds the vessel pressure. A Coriolis meter measures the gas before it leaves the skid.

Step 4 of 7

Liquid outlet and metering

A level control valve discharges the liquid through a Coriolis meter, which measures its mass flow and density.

Step 5 of 7

Water-cut analyzer

The analyzer measures the share of water in the liquid. With the Coriolis reading, it gives the oil and water volumes of the test.

Step 6 of 7

Outlets

Gas and liquid leave the skid to the line, the production facilities or the disposal point your site uses, through isolation valves.

Control and records

Control cabinet and data

The cabinet collects pressure, level, flow and water-cut signals, logs the test data and raises alarms. Data can go to a remote location by remote communication.

02

Typical configurations and options

What goes on the skid and what can change
  • Phases2-phase or 3-phase compact test separator
  • MountingSkid mounted, or trailer mounted for moving between wells
  • Design codeASME VIII Div. 1 pressure vessel
  • MaterialsCarbon steel, or NACE materials for sour service
  • Gas measurementCoriolis meter on the gas outlet, with pressure control
  • Liquid measurementCoriolis meter on the liquid outlet, with level control
  • Water cutWater-cut analyzer on the liquid line
  • SafetyPressure relief valve and instrumentation sized to the vessel
  • InstrumentationPressure, temperature and level transmitters and gauges
  • Control cabinetControl cabinet with data logging and alarms
  • CommunicationRemote communication, as your site requires
  • Area classificationInstruments, cabinet and wiring selected for the classified area
03

Standards and documentation

Design references and the documents we deliver

Designed to ASTM, ASME, ISO and API standards. The applicable codes are agreed per project.

Typical references

  • ASME VIII-1Pressure vessels: separator shell, heads and nozzles
  • API 12JOil and gas separators
  • NACE MR0175 / ISO 15156Materials for H2S-containing (sour) service
  • API 520 / 521Pressure relief devices: sizing and relieving systems
  • API MPMS ch. 5Metering of liquid hydrocarbons, including Coriolis meters
  • ASME B31.3Process piping on the skid

Typical documentation package

  • P&ID
  • General arrangement
  • Vessel and instrument datasheets
  • Design calculations
  • Control cabinet drawings and I/O list
  • FAT procedure and report
  • Operation and maintenance manual

Factory acceptance test (FAT) in our workshops and site acceptance test (SAT) at the installation site.

Brands

Typical brands on this skid

Brands we represent, integrated alongside your preference.

Yokogawa
Flexim
Samson
Magnetrol

See all brands →

Need one built for your process?

Send us fluid, flow, pressure and temperature, or just your idea. An engineer returns a proposed configuration.

Get a quoteSkids